Verified NSE5_FAZ-7.0 Exam Dumps PDF [2023] Access using Actual4test
Try Best NSE5_FAZ-7.0 Exam Questions from Training Expert Actual4test
Fortinet NSE5_FAZ-7.0 certification exam is an excellent way for candidates to demonstrate their expertise in FortiAnalyzer 7.0. Fortinet NSE 5 - FortiAnalyzer 7.0 certification validates the candidate's ability to deploy, configure, and administer FortiAnalyzer effectively. It also highlights the candidate's skills in log management, event analysis, reporting, and threat detection using FortiAnalyzer.
Fortinet NSE5_FAZ-7.0 exam is a certification exam designed for IT professionals who wish to validate their skills and knowledge in Fortinet's FortiAnalyzer 7.0 product. FortiAnalyzer is a centralized logging and reporting solution that provides organizations with visibility into their network activity and security events. NSE5_FAZ-7.0 exam covers a range of topics related to FortiAnalyzer, including its architecture, installation, configuration, and troubleshooting.
Fortinet NSE5_FAZ-7.0 certification exam consists of multiple-choice questions and simulations, which test the candidate's ability to configure and manage FortiAnalyzer 7.0. NSE5_FAZ-7.0 exam covers various topics, including the FortiAnalyzer 7.0 architecture, log collection, analysis, reporting, and troubleshooting. NSE5_FAZ-7.0 exam is designed to test the candidate's ability to deploy and manage FortiAnalyzer 7.0 in a real-world environment.
NEW QUESTION # 63
An administrator has configured the following settings:
config system global
set log-checksum md5-auth
end
What is the significance of executing this command?
- A. This command records passwords in log files and encrypts them.
- B. This command records the log file MD5 hash value and authentication code.
- C. This command records the log file MD5 hash value.
- D. This command encrypts log transfer between FortiAnalyzer and other devices.
Answer: B
NEW QUESTION # 64
A play book contains five tasks in total. An administrator executed the playbook and four out of five tasks finished successfully, but one task failed. What will be the status of the playbook after its execution?
- A. Failed
- B. Success
- C. Upstream_failed
- D. Running
Answer: B
NEW QUESTION # 65
Which two elements are contained in a system backup created on FortiAnalyzer? (Choose two.)
- A. Logs from registered devices
- B. Database snapshot
- C. Report information
- D. System information
Answer: C,D
Explanation:
What does the System Configuration backup include?
System information, such as the device IP address and administrative user information.
Device list, such as any devices you configured to allow log access.
Report information, such as any configured report settings, as well as all your custom report details. These are not the actual reports.
FortiAnalyzer_7.0_Study_Guide-Online pag. 29
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 29: What does the System Configuration backup include?
* System information, such as the device IP address and administrative user information
* Device list, such as any devices you configured to allow log access
* Report information, such as any configured report settings, as well as all your custom report details. These are not the actual reports.
NEW QUESTION # 66
If the primary FortiAnalyzer in an HA cluster fails, how is the new primary elected?
- A. The firmware version is checked first.
- B. The configured IP address is checked first.
- C. The configured priority is checked first
- D. The active port number is checked first.
Answer: A
NEW QUESTION # 67
What purposes does the auto-cache setting on reports serve? (Choose two.)
- A. To provide diagnostics on report generation time
- B. To reduce the log insert lag rate
- C. To reduce report generation time
- D. To automatically update the hcache when new logs arrive
Answer: C,D
NEW QUESTION # 68
Refer to the exhibit.
Which statement is correct regarding the event displayed?
- A. The risk source is isolated.
- B. The security event risk is considered open.
- C. The security risk was blocked or dropped.
- D. An incident was created from this event.
Answer: C
NEW QUESTION # 69
Refer to the exhibit.
What is the purpose of using the Chart Builder feature on FortiAnalyzer?
- A. In Log View, this feature allows you to build a chart and chart automatically, on the top 100 log entries.
- B. You can add charts to generated reports using this feature.
- C. In Log View, this feature allows you to build a dataset and chart automatically, based on the filtered search results.
- D. This feature allows you to build a chart under FortiView.
Answer: C
NEW QUESTION # 70
You've moved a registered logging device out of one ADOM and into a new ADOM. What happens when you rebuild the new ADOM database?
- A. FortiAnalyzer migrates archive logs to the new ADOM.
- B. FortiAnalyzer removes logs from the old ADOM.
- C. FortiAnalyzer resets the disk quota of the new ADOM to default.
- D. FortiAnalyzer migrates analytics logs to the new ADOM.
Answer: D
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=FD40383
NEW QUESTION # 71
What is the purpose of the following CLI command?
- A. To add the MD's hash value and authentication code
- B. To add a log file checksum
- C. To add a unique tag to each log to prove that it came from this FortiAnalyzer
- D. To encrypt log communications
Answer: B
Explanation:
https://docs2.fortinet.com/document/fortianalyzer/6.0.3/cli-reference/849211/global
NEW QUESTION # 72
Refer to the exhibit.
The exhibit shows "remoteservergroup" is an authentication server group with LDAP and RADIUS servers.
Which two statements express the significance of enabling "Match all users on remote server" when configuring a new administrator? (Choose two.)
- A. It creates a wildcard administrator using LDAP and RADIUS servers.
- B. Use remoteadmin from LDAP and RADIUS servers will be able to log in to FortiAnalyzer at anytime.
- C. It allows administrators to use two-factor authentication.
- D. Administrator can log in to FortiAnalyzer using their credentials on remote servers LDAP and RADIUS.
Answer: A,D
NEW QUESTION # 73
Which statement correctly describes the management extensions available on FortiAnalyzer?
- A. Management extensions require a dedicated VM for best performance.
- B. Management extensions allow FortiAnalyzer to act as a ForbSIEM supervisor.
- C. Management extensions may require a minimum number of CPU cores to run.
- D. Management extensions do not require additional licenses.
Answer: C
Explanation:
Events in FortiAnalyzer will be in one of four statuses. The current status will determine if more actions need to be taken by the security team or not.
The possible statuses are:
Unhandled: The security event risk is not mitigated or contained, so it is considered open.
Contained: The risk source is isolated.
Mitigated: The security risk is mitigated by being blocked or dropped.
(Blank): Other scenarios.
FortiAnalyzer_7.0_Study_Guide-Online pag. 189.
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 189: Review the hardware requirements before you enable a management extension application. Some of them require a minimum amount of memory or a minimum number of CPU cores.
NEW QUESTION # 74
Which statements are true regarding securing communications between FortiAnalyzer and FortiGate with IPsec? (Choose two.)
- A. Must establish an IPsec tunnel ID and pre-shared key.
- B. IPsec is only enabled through the CLI on FortiAnalyzer.
- C. Must configure the FortiAnalyzer end of the tunnel only--the FortiGate end is auto-negotiated.
- D. IPsec cannot be enabled if SSL is enabled as well.
Answer: D
NEW QUESTION # 75
Which SQL query is in the correct order to query the database in the FortiAnslyzer?
- A. SELECT devid FROM Slog- WHERE *user' =' USERl' GROUP BY devid
- B. SELECT devid WHERE 'u3er'='USERl' FROM $ log GROUP BY devid
- C. FROM Slog WHERE 'user* =' USERl' SELECT devid GROUP BY devid
- D. SELECT devid FROM Slog GROOP BY devid WHERE * user' =* USERl'
Answer: A
NEW QUESTION # 76
What FortiGate process caches logs when FortiAnalyzer is not reachable?
- A. logfiled
- B. miglogd
- C. sqlplugind
- D. oftpd
Answer: B
NEW QUESTION # 77
For which two purposes would you use the command set log checksum? (Choose two.)
- A. To help protect against man-in-the-middle attacks during log upload from FortiAnalyzer to an SFTP server
- B. To prevent log modification or tampering
- C. To send an identical set of logs to a second logging server
- D. To encrypt log communications
Answer: A,B
Explanation:
To prevent logs from being tampered with while in storage, you can add a log checksum using the config system global command. You can configure FortiAnalyzer to record a log file hash value, timestamp, and authentication code when the log is rolled and archived and when the log is uploaded (if that feature is enabled). This can also help against man-in-the-middle only for the transmission from FortiAnalyzer to an SSH File Transfer Protocol (SFTP) server during log upload.
FortiAnalyzer_7.0_Study_Guide-Online page 149
NEW QUESTION # 78
Which two statements are true regarding fabric connectors? (Choose two.)
- A. Configuring fabric connectors to send notification to ITSM platform upon incident creation Is more efficient than third-party information from the FortiAnalyzer API.
- B. Cloud-Out connections allow you to send real-time logs to pubic cloud accounts like Amazon S3, Azure Blob , and Google Cloud.
- C. Fabric connectors allow to save storage costs and improve redundancy.
- D. Storage connector service does not require a separate license to send logs to cloud platform.
Answer: A,B
NEW QUESTION # 79
What does the disk status Degraded mean for RAID management?
- A. The FortiAnalyzer device is writing to all the hard drives on the device in order to make the array fault tolerant.
- B. The hard driveiIs no longer being used by the RAID controller
- C. One or more drives are missing from the FortiAnalyzer unit. The drive is no longer available to the operating system.
- D. The FortiAnalyzer device is writing data to a newly added hard drive in order to restore the hard drive to an optimal state.
Answer: B
NEW QUESTION # 80
Logs are being deleted from one of your ADOMs earlier that the configured setting for archiving in your data policy. What is the most likely problem?
- A. The total disk space is insufficient and you need to add other disk.
- B. Logs in that ADOM are being forwarded in real-time to another FortiAnalyzer device.
- C. CPU resources are too high.
- D. The ADOM disk quota is set too low based on log rates.
Answer: D
Explanation:
https://help.fortinet.com/fmgr/50hlp/56/5-6-1/FMG FAZ/1100_Storage/0017_Deleted%20device%20logs.htm
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/87802/automatic-deletion
NEW QUESTION # 81
You are using RAID with a FortiAnalyzer that supports software RAID, and one of the hard disks on FortiAnalyzer has failed.
What is the recommended method to replace the disk?
- A. Perform a hot swap
- B. Clear all RAID alarms and replace the disk while FortiAnalyzer is still running
- C. Downgrade your RAID level, replace the disk, and then upgrade your RAID level
- D. Shut down FortiAnalyzer and then replace the disk
Answer: D
Explanation:
https://community.fortinet.com/t5/FortiAnalyzer/Technical-Note-How-to-swap-Hard-Disk-on-FortiAnalyzer/ta-p/194997?externalID=FD41397#:~:text=If%20a%20hard%20disk%20on,process%20known%20as%20hot%20swapping
NEW QUESTION # 82
Refer to the exhibit.
What does the data point at 14:55 tell you?
- A. Raw logs are reaching FortiAnalyzer faster than they can be indexed
- B. The received rate is almost at its maximum for this device
- C. Logs are being dropped
- D. The sqlplugind daemon is behind in log indexing by two logs
Answer: A
NEW QUESTION # 83
Refer to the exhibit.
Which statement is correct regarding the event displayed?
- A. The risk source is isolated.
- B. The security event risk is considered open.
- C. The security risk was blocked or dropped.
- D. An incident was created from this event.
Answer: C
Explanation:
Events in FortiAnalyzer will be in one of four statuses. The current status will determine if more actions need to be taken by the security team or not.
The possible statuses are:
Unhandled: The security event risk is not mitigated or contained, so it is considered open.
Contained: The risk source is isolated.
Mitigated: The security risk is mitigated by being blocked or dropped.
(Blank): Other scenarios.
FortiAnalyzer_7.0_Study_Guide-Online pag. 206
NEW QUESTION # 84
What can the CLI command # diagnose test application oftpd 3 help you to determine?
- A. What logs, if any, are reaching FortiAnalyzer
- B. What ADOMs are enabled and configured
- C. What devices are registered and unregistered
- D. What devices and IP addresses are connecting to FortiAnalyzer
Answer: D
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/cli-reference/395556/test#test_application
NEW QUESTION # 85
You crested a playbook on FortiAnalyzer that uses a FortiOS connector
When configuring the FortiGate side, which type of trigger must be used so that the actions in an automation stitch are available in the FortiOS connector?
- A. Incoming webhook
- B. FortiOS Event Log
- C. Fabric Connector event
- D. FortiAnalyzer Event Handler
Answer: C
NEW QUESTION # 86
......
Latest 100% Passing Guarantee - Brilliant NSE5_FAZ-7.0 Exam Questions PDF: https://examtorrent.actual4test.com/NSE5_FAZ-7.0_examcollection.html