Steps Necessary To Pass The PCNSE Exam from Training Expert Actual4test
Valid Way To Pass PCNSE PAN-OS's PCNSE Exam
The PCNSE certification exam is a challenging exam, and passing it requires a lot of preparation and dedication. Candidates are recommended to have at least six months of experience with the Palo Alto Networks platform before attempting the exam. Candidates can prepare for the exam by taking the official Palo Alto Networks training courses, studying the exam blueprint, and practicing with the Palo Alto Networks platform. Upon passing the exam, candidates will be awarded the PCNSE certification, which is a valuable asset for their career growth and professional development.
NEW QUESTION # 15
What are three tasks that cannot be configured from Panorama by using a template stack?
(Choose three)
- A. add administrator accounts
- B. rename a vsys on a multi-vsys firewall
- C. configure a device block list
- D. change the firewall management IP address
- E. enable operational modes such as normal mode, multi-vsys mode, or FIPS-CC mode
Answer: B,C,E
Explanation:
https://docs.paloaltonetworks.com/panorama/11-0/panorama-admin/manage-firewalls/manage- templates-and-template-stacks/template-capabilities-and-exceptions
NEW QUESTION # 16
Which option enables a Palo Alto Networks NGFW administrator to schedule Application and Threat updates while applying only new content IDs to traffic?
- A. Select download-only
- B. Select download-and-install, with "Disable new apps in content update" selected
- C. Select disable application updates and select "Install only Threat updates"
- D. Select download-and-install
Answer: B
Explanation:
On the Device Dynamic Updates page, select Schedule . Choose to Disable new apps in content update for downloads and installations of content releases.
https://docs.paloaltonetworks.com/pan-os/10-2/pan-os-admin/app-id/manage-new-app-ids- introduced-in-content-releases/disable-or-enable-app-ids
NEW QUESTION # 17
Which template values will be configured on the firewall if each template has an SSL to be deployed. The template stack should consist of four templates arranged according to the diagram.
Which template values will be configured on the firewall if each template has an SSL/TLS Service profile configured named Management?
- A. Values in Chicago
- B. Values in Datacenter
- C. Values in Global Settings
- D. Values in efwOlab.chi
Answer: A
Explanation:
The template stack should consist of four templates arranged according to the diagram. The template values that will be configured on the firewall if each template has an SSL/TLS Service profile configured named Management will be the values in Chicago. This is because the SSL/TLS Service profile is configured in the Chicago template, which is the highest priority template in the stack. The firewall will inherit the settings from the highest priority template that has the setting configured, and ignore the settings from the lower priority templates that have the same setting configured. Therefore, the values in Datacenter, efwOlab.chi, and Global Settings will not be applied to the firewall. Reference:
[Manage Templates and Template Stacks]
[Template Stack Configuration]
[Template Stack Priority]
NEW QUESTION # 18
What are three valid actions in a File Blocking Profile? (Choose three)
- A. Continue
- B. Forward
- C. Upload
- D. Alret
- E. Block
- F. Reset-both
Answer: B,D,E
Explanation:
https://live.paloaltonetworksHYPERLINK "https://live.paloaltonetworks.com/t5/Configuration- Articles/File-Blocking-Rulebase-and-Action-Precedence/ta-p/53623".com/t5/Configuration- ArticHYPERLINK "https://live.paloaltonetworks.com/t5/Configuration-Articles/File-Blocking- Rulebase-and-Action-Precedence/ta-p/53623"les/File-Blocking-RulebHYPERLINK
"https://live.paloaltonetworks.com/t5/Configuration-Articles/File-Blocking-Rulebase-and-Action- Precedence/ta-p/53623"ase-and-Action-Precedence/ta-p/53623
NEW QUESTION # 19
A company hosts a publically accessible web server behind a Palo Alto Networks next generation firewall with the following configuration information.
- Users outside the company are in the "Untrust-L3" zone
- The web server physically resides in the "Trust-L3" zone.
- Web server public IP address: 23.54.6.10
- Web server private IP address: 192.168.1.10
Which two items must be NAT policy contain to allow users in the untrust-L3 zone to access the web server? (Choose two)
- A. Untrust-L3 for both Source and Destination zone
- B. Destination IP of 192.168.1.10
- C. Destination IP of 23.54.6.10
- D. Untrust-L3 for Source Zone and Trust-L3 for Destination Zone
Answer: A,C
Explanation:
Before configuring the NAT rules, consider the sequence of events for this scenario.
Host 192.0.2.250 sends an ARP request for the address 192.0.2.100 (the public address of the destination server).
The firewall receives the ARP request packet for destination 192.0.2.100 on the Ethernet1/1 interface and processes the request. The firewall responds to the ARP request with its own MAC address because of the destination NAT rule configured.
The NAT rules are evaluated for a match. For the destination IP address to be translated, a destination NAT rule from zone Untrust-L3 to zone Untrust-L3 must be created to translate the destination IP of 192.0.2.100 to 10.1.1.100.
After determining the translated address, the firewall performs a route lookup for destination
10.1.1.100 to determine the egress interface. In this example, the egress interface is Ethernet1/2 in zone DMZ.
The firewall performs a security policy lookup to see if the traffic is permitted from zone Untrust- L3 to DMZ.
The direction of the policy matches the ingress zone and the zone where the server is physically located.
The security policy refers to the IP address in the original packet, which has a destination address of 192.0.2.100.
NEW QUESTION # 20
An administrator encountered problems with inbound decryption. Which option should the administrator investigate as part of triage?
- A. Firewall connectivity to a CRL
- B. Importation of a certificate from an HSM
- C. Root certificate imported into the firewall with "Trust" enabled
- D. Security policy rule allowing SSL to the target server
Answer: C
NEW QUESTION # 21
The administrator has enabled BGP on a virtual router on the Palo Alto Networks NGFW, but new routes do not seem to be populating the virtual router.
Which two options would help the administrator troubleshoot this issue? (Choose two.)
- A. View the ACC tab to isolate routing issues.
- B. View the Runtime Stats and look for problems with BGP configuration.
- C. Perform a traffic pcap on the NGFW to see any BGP problems.
- D. View the System logs and look for the error messages about BGP.
Answer: B,C
Explanation:
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClEWCA0
NEW QUESTION # 22
When using certificate authentication for firewall administration, which method is used for authorization?
- A. Kerberos
- B. Radius
- C. LDAP
- D. Local
Answer: D
Explanation:
Explanation
Authentication: Certificates Authorization: Local The administrative accounts are local to the firewall, but authentication to the web interface is based on client certificates. You use the firewall to manage role assignments but access domains are not supported.
NEW QUESTION # 23
Which two subscriptions are available when configuring Panorama to push dynamic updates to connected devices? (Choose two.)
- A. User-ID
- B. Applications and Threats
- C. Antivirus
- D. Content-ID
Answer: B,C
Explanation:
Explanation/Reference: https://www.paloaltonetworks.com/documentation/80/pan-os/web-interface-help/device/device- dynamic-updates
NEW QUESTION # 24
An engineer reviews high availability (HA) settings to understand a recent HA failover event. Review the screenshot below.
Which timer determines the frequency at which the HA peers exchange messages in the form of an ICMP (ping)
- A. Hello Interval
- B. Heartbeat Interval
- C. Monitor Fail Hold Up Time
- D. Promotion Hold Time
Answer: B
Explanation:
The heartbeat interval determines the frequency at which the HA peers exchange messages in the form of an ICMP (ping). The default value is 1000 milliseconds (1 second). The heartbeat interval is used to detect failures and trigger failover in an HA pair1. The other options are not correct. The hello interval determines the frequency at which the HA peers exchange messages in the form of an HA packet. The default value is 3000 milliseconds (3 seconds). The hello interval is used to establish and maintain HA connectivity2. The promotion hold time determines the amount of time that a passive firewall waits before it becomes active after detecting a failure on the active firewall. The default value is 5000 milliseconds (5 seconds)3. The monitor fail hold up time determines the amount of time that a firewall waits before it declares a monitor failure after detecting a link down event on an interface. The default value is 2000 milliseconds (2 seconds)4. Reference: 1: https://docs.paloaltonetworks.com/pan-os/10-2/pan-os-admin/high-availability/ha-concepts/ha-timers 2: https://docs.paloaltonetworks.com/pan-os/10-2/pan-os-admin/high-availability/ha-concepts/ha-timers 3: https://docs.paloaltonetworks.com/pan-os/10-2/pan-os-admin/high-availability/ha-concepts/ha-timers 4: https://docs.paloaltonetworks.com/pan-os/10-2/pan-os-admin/high-availability/ha-concepts/ha-timers
NEW QUESTION # 25
Which two virtualization platforms officially support the deployment of Palo Alto Networks VM-Series firewalls?
(Choose two.)
- A. Red Hat Enterprise Virtualization (RHEV)
- B. Boot Strap Virtualization Module (BSVM)
- C. Kernel Virtualization Module (KVM)
- D. Microsoft Hyper-V
Answer: C,D
Explanation:
Explanation/Reference: https://www.paloaltonetworks.com/products/secure-the-network/virtualized-next-generation-firewall/ vm-series
NEW QUESTION # 26
A remote administrator needs firewall access on an untrusted interface Which two components are required on the firewall to configure certificate-based administrator authentication to the web Ul? (Choose two)
- A. certificate profile
- B. client certificate
- C. certificate authority (CA) certificate
- D. server certificate
Answer: A,B
Explanation:
https://docs.paloaltonetworks.com/pan-os/9-1/pan-os-admin/firewall-administration/manage-firewall-administrators/configure-administrative-accounts-and-authentication/configure-certificate-based-administrator-authentication-to-the-web-interface.html
NEW QUESTION # 27
With the default TCP and UDP settings on the firewall, what will be the identified application in the following session?
- A. unknown-tcp
- B. Insufficient-data
- C. not-applicable
- D. Incomplete
Answer: C
Explanation:
Explanation
Traffic didnt match any other policies and so landed at the implicit "deny all" policy. If it's deny all, the traffic was dropped before the application could be determined.
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClibCAC
NEW QUESTION # 28
Which operation will impact the performance of the management plane?
- A. decrypting SSL Sessions
- B. DoS Protection
- C. WildFire Submissions
- D. Generating a SaaS Application Report.
Answer: D
Explanation:
Explanation
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClSvCAK Decrypting SSL Sessions is a dataplane task. ask.Wildfire submissions is a Dataplane task.Generating a SaaS Application report is a Management Plane function.
NEW QUESTION # 29
What are three reasons why an installed session can be identified with the application incomplete" tag? (Choose three.)
- A. The TCP connection did not fully establish
- B. There was no application data after the TCP connection was established
- C. The TCP connection was terminated without identifying any application data
- D. The client sent a TCP segment with the PUSH flag set
- E. There is not enough application data after the TCP connection was established
Answer: A,B,C
Explanation:
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClibCAC
NEW QUESTION # 30
A company wants to deploy IPv6 on its network which requires that all company Palo Alto Networks firewalls process IPv6 traffic and to be configured with IPv6 addresses. Which consideration should the engineers take into account when planning to enable IPv6?
- A. Device > Setup Settings Do not enable on each interface
- B. Network > Zone Settings Do not enable on each interface
- C. Device > Setup Settings Enable on each interface
- D. Network > Zone Settings Enable on each interface
Answer: C
NEW QUESTION # 31
Which Security Policy Rule configuration option disables antivirus and anti-spyware scanning of server-to-client flows only?
- A. Add server IP Security Policy exception
- B. Apply an Application Override
- C. Disable HIP Profile
- D. Disable Server Response Inspection
Answer: D
Explanation:
In the Other Settings section, select the option to Disable Server Response Inspection. This setting disables the antivirus and anti-spyware scanning on the server-side responses, and thus reduces the load on the firewall.
NEW QUESTION # 32
What should an administrator consider when planning to revert Panorama to a pre-PAN-OS 8.1 version?
- A. When Panorama is reverted to an earlier PAN-OS release, variables used in templates or template stacks will be removed automatically.
- B. Administrators need to manually update variable characters to those used in pre-PAN-OS 8.1.
- C. An administrator must use the Expedition tool to adapt the configuration to the pre-PAN-OS 8.1 state.
- D. Panorama cannot be reverted to an earlier PAN-OS release if variables are used in templates or template stacks.
Answer: D
Explanation:
https://www.paloaltonetworks.com/documentation/81/pan-os/newfeaturesguide/upgrade-to-pan- os-81/upgradedowngrade-considerations
NEW QUESTION # 33
Refer to exhibit.
An organization has Palo Alto Networks NGFWs that send logs to remote monitoring and security
management platforms. The network team has reported excessive traffic on the corporate WAN.
How could the Palo Alto Networks NGFW administrator reduce WAN traffic while maintaining support for
all the existing monitoring/security platforms?
- A. Configure log compression and optimization features on all remote firewalls.
- B. Forward logs from firewalls only to Panorama and have Panorama forward logs to other external
services. - C. Any configuration on an M-500 would address the insufficient bandwidth concerns.
- D. Forward logs from external sources to Panorama for correlation, and from Panorama send them to the
NGFW.
Answer: A
NEW QUESTION # 34
People are having intermittent quality issues during a live meeting via web application.
- A. Use QoS profile to define QoS Classes
- B. Use QoS Classes to define QoS Profile
- C. Use QoS Profile to define QoS Classes and a QoS Policy
- D. Use QoS Classes to define QoS Profile and a QoS Policy
Answer: C
NEW QUESTION # 35
......
To prepare for the PCNSE certification exam, candidates can take advantage of Palo Alto Networks training courses, online resources, and study materials. PCNSE exam is challenging, and candidates are encouraged to have hands-on experience with Palo Alto Networks products and technologies before attempting the exam.
All PCNSE Dumps and Palo Alto Networks Certified Network Security Engineer Exam Training Courses: https://examtorrent.actual4test.com/PCNSE_examcollection.html