Actual4test NSE7_PBC-6.4 Dumps PDF - 100% Passing Guarantee
NSE7_PBC-6.4 Braindumps Real Exam Updated on Feb 07, 2023 with 30 Questions
How to study the Fortinet NSE7_PBC-6.4 Exam
This Fortinet NSE7_PBC-6.4 examination is very tough to prepare. Due to the fact that it needs all candidate focus with practice. So, if Prospect wants to pass this Fortinet NSE7_PBC-6.4 test with great grades after that he has to select the right prep work material. By passing the Fortinet NSE7_PBC-6.4 test can make a great deal of distinction in your profession. Numerous Prospects intends to achieve success in the Fortinet NSE7_PBC-6.4 exam, but they are failing in it. As a result of their incorrect choice yet if the prospect can get legitimate and also the latest Fortinet NSE7_PBC-6.4 research product then he can easily obtain excellent qualities in the Fortinet NSE7_PBC-6.4 exam. Actual4test offering numerous Fortinet NSE7_PBC-6.4 test inquiries that help the prospect to obtain success in the Fortinet NSE7_PBC-6.4 examination. Our Fortinet NSE7_PBC-6.4 disposes specially designed for those who intend to obtain their desired cause the just first effort. Fortinet NSE7_PBC-6.4 Dumps inquiries offered by Actual4test make candidate preparation material extra impactful and also the very best component is that the training product given by Actual4test for Fortinet NSE7_PBC-6.4 exams are developed by our specialists in the numerous fields of the IT industry.
NEW QUESTION 13
Which statement about FortiSandbox in Amazon Web Services (AWS) is true?
- A. FortiSandbox in AWS uses Windows virtual machines (VMs) to inspect files.
- B. FortiSandbox in AWS can have a maximum of eight virtual machines (VMs) that inspect files.
- C. In AWS, virtual machines (VMs) that inspect files are constantly up and running.
- D. In AWS, virtual machines (VMs) that inspect files do not have to be reset after inspecting a file.
Answer: A
Explanation:
Explanation
FortiSandbox deploys new EC2 instances with the custom Windows VMs, and then it sends malware, runs it, and captures the results for analysis. FortiSandbox for AWS does not need more resources because it performs management and analysis tasks only. Note that the cost varies based on the number of EC2 instances deployed, size of the instances, and duration of the running time.
NEW QUESTION 14
Which two statements about Amazon Web Services (AWS) networking are correct? (Choose two.)
- A. Multicast traffic is not allowed.
- B. 802.1q VLAN tags are allowed inside the same virtual private cloud.
- C. Proxy ARP entries are disregarded.
- D. AWS DNS reserves the first host IP address of each subnet.
Answer: A,C
Explanation:
Explanation
https://blog.ipspace.net/2018/05/amazon-web-services-networking-overview.html
NEW QUESTION 15
You need to deploy FortiGate VM devices in a highly available topology in the Microsoft Azure cloud. The following are the requirements of your deployment:
*Two FortiGate devices must be deployed; each in a different availability zone.
*Each FortiGate requires two virtual network interfaces: one will connect to a public subnet and the other will connect to a private subnet.
*An external Microsoft Azure load balancer will distribute ingress traffic to both FortiGate devices in an active- active topology.
*An internal Microsoft Azure load balancer will distribute egress traffic from protected virtual machines to both FortiGate devices in an active-active topology.
*Traffic should be accepted or denied by a firewall policy in the same way by either FortiGate device in this topology.
Which FortiOS CLI configuration can help reduce the administrative effort required to maintain the FortiGate devices, by synchronizing firewall policy and object configuration between the FortiGate devices?
- A. config system ha
- B. config system sdn-connector
- C. config system session-sync
- D. config system auto-scale
Answer: A
Explanation:
Explanation
FTG HA Active/Active requires the following configuration to sync the session by FGSP config system ha set session-pickup enable set session-pickup-connectionless enable set session-pickup-nat enable set session-pickup-expectation enable set override disable end config system cluster-sync edit 0 set peerip 10.0.1.x set syncvd "root" next end
https://github.com/fortinet/azure-templates/tree/main/FortiGate/Active-Active-ELB-ILB
NEW QUESTION 16
Refer to the exhibit.
In your Amazon Web Services (AWS) virtual private cloud (VPC), you must allow outbound access to the internet and upgrade software on an EC2 instance, without using a NAT instance. This specific EC2 instance is running in a private subnet: 10.0.1.0/24.
Also, you must ensure that the EC2 instance source IP address is not exposed to the public internet. There are two subnets in this VPC in the same availability zone, named public (10.0.0.0/24) and private (10.0.1.0/24).
How do you achieve this outcome with minimum configuration?
- A. Deploy a NAT gateway with an EIP in the public subnet, edit route tables, select Public-route, and delete the route destination 10.0.0.0/16 to target local.
- B. Deploy a NAT gateway with an EIP in the public subnet, edit route tables, select Private-route and add a new route destination 0.0.0.0/0 to target the NAT gateway.
- C. Deploy a NAT gateway with an EIP in the private subnet, edit the public main routing table, and change the destination route 0.0.0.0/0 to the target NAT gateway.
- D. Deploy a NAT gateway with an EIP in the private subnet, edit route tables, select Private-route, and add a new route destination 0.0.0.0/0 to the target internet gateway.
Answer: B
Explanation:
Explanation
AWS NAT gateway allows instances in a private subnet to connect to the internet or other AWS services without using NAT instance. the main routing table sends internet traffic from the private subnet instances to the NAT gateway, then NAT gateway sends traffic to the IGW using the source IP address of the elastic IP address.
Deploy a NAT gateway with an EIP in the public subnet, edit route tables, select Private-route and add a new route destination 0.0.0.0/0 to target the NAT gateway.
NEW QUESTION 17
You have been asked to develop an Azure Resource Manager infrastructure as a code template for the FortiGate-VM, that can be reused for multiple deployments. The deployment fails, and errors point to the storageAccount name.
Which two are restrictions for a storageAccount name in an Azure Resource Manager template? (Choose two.)
- A. The storageAccount name must contain between 3 and 24 alphanumeric characters.
- B. The storageAccount name must use special characters.
- C. The uniqueString() function must be used.
- D. The storageAccount name must be in lowercase.
Answer: A,D
Explanation:
Explanation
-Storage account names must be between 3 and 24 characters in length and may contain numbers and lowercase letters only. https://learn.microsoft.com/en-us/azure/storage/common/storage-account-overview
https://docs.microsoft.com/en-us/azure/templates/microsoft.storage/storageaccounts?tabs=bicep Property values / storageAccounts name --> The resource name :
* string (required)
* Character limit: 3-24
* Valid characters: Lowercase letters and numbers.
* Resource name must be unique across Azure.
NEW QUESTION 18
Refer to the exhibit.
Consider an active-passive HA deployment in Microsoft Azure. The exhibit shows an excerpt from the passive FortiGate-VM node.
If the active FortiGate-VM fails, what are the results of the API calls made by the FortiGate named SSTENTAZFGT-0302? (Choose two.)
- A. 172.29.32.71 is set as a next hop IP for all routes under FortigateUDR-01
- B. SSTENTAZFGT-03-FloatingPIP public IP is assigned to NIC SSTENTAZFGT-0302-Nic-01
- C. The network interface of the active unit moves to itself
- D. SSTENTAZFGT-03-FloatingPIP is assigned to the IP configuration with the name SSTENTAZFGT-
0302-Nic-01, under the network interface SSTENTAZFGT-0302-Nic-01
Answer: A,D
NEW QUESTION 19
Which two Amazon Web Services (AWS) topologies support east-west traffic inspection within the AWS cloud by the FortiGate VM? (Choose two.)
- A. A multiple VPC deployment utilizing a transit gateway
- B. A multiple VPC deployment utilizing a transit VPC topology
- C. A single VPC deployment with multiple subnets
- D. A single VPC deployment with multiple subnets and a NAT gateway
Answer: A,B
Explanation:
Explanation
Multi-VPC design. AWS recommends segmenting networks at the VPC level. In this approach, workloads are grouped together at the VPC level instead of the subnet level. All traffic between VPCs will be inspected by network security virtual firewalls at each VPC or at a shared VPC. Design patterns such as Transit VPC or AWS Transit Gateway can be used to achieve this in an automated and scalable fashion.
NEW QUESTION 20
Refer to the exhibit.
A customer has deployed an environment in Amazon Web Services (AWS) and is now trying to send outbound traffic from the Web servers to the Internet. The FortiGate policies are configured to allow all outbound traffic; however, the traffic is not reaching the FortiGate internal interface.
What are two possible reasons for this behavior? (Choose two.)
- A. The Internet gateway (IGW) is not added to VPC (virtual private cloud).
- B. AWS source and destination checks are enabled on the FortiGate interfaces.
- C. AWS security groups may be blocking the traffic.
- D. The web servers are not configured with the default gateway.
Answer: B,C
Explanation:
Explanation
You need to check if source/destination are enabled. Public_Cloud_6.4_Study_Guide Page 67
NEW QUESTION 21
An Amazon Web Services (AWS) auto-scale FortiGate cluster has just experienced a scale-down event, terminating a FortiGate in availability zone C.
This has now black-holed the private subnet in this availability zone.
What action will the worker node automatically perform to restore access to the black-holed subnet?
- A. The worker node applies a route table from a non-black-holed subnet to the black-holed subnet.
- B. The worker node modifies the route table applied to the black-holed subnet changing its default route to point to a running FortiGate on the worker node's private subnet interface.
- C. The worker node moves the virtual IP of the terminated FortiGate to a running FortiGate on the worker node's private subnet interface.
- D. The worker node migrates the subnet to a different availability zone.
Answer: D
NEW QUESTION 22
Refer to the exhibit.
Which two conditions will enable you to segregate and secure the traffic between the hub and the spokes in Microsoft Azure? (Choose two.)
- A. Use ExpressRoute to interconnect the hub VNets and spoke VNets.
- B. Implement the FortiGate-VM network virtual appliance (NVA) in the hub and use user-defined routes (UDRs) in the spokes.
- C. Configure VNet peering between the hub and spokes.
- D. Configure VNet peering between the spokes only.
Answer: A,C
NEW QUESTION 23
You have been asked to develop an Azure Resource Manager infrastructure as a code template for the FortiGate-VM, that can be reused for multiple deployments. The deployment fails, and errors point to the storageAccount name.
Which two are restrictions for a storageAccount name in an Azure Resource Manager template? (Choose two.)
- A. The storageAccount name must use special characters.
- B. The storageAccount name must contain between 3 and 24 alphanumeric characters.
- C. The storageAccount name must be in lowercase.
- D. The uniqueString() function must be used.
Answer: C,D
NEW QUESTION 24
Which two statements about Microsoft Azure network security groups are true? (Choose two.)
- A. Network security groups are stateless inbound and outbound rules used for traffic filtering.
- B. Network security groups are a stateful inbound and outbound rules used for traffic filtering.
- C. Network security groups can be applied to subnets and virtual network interfaces.
- D. Network security groups can be applied to subnets only.
Answer: B,D
Explanation:
Explanation/Reference: https://docs.microsoft.com/en-us/azure/virtual-network/network-security-groups-overview
NEW QUESTION 25
Which two statements about the Amazon Cloud Services (AWS) network access control lists (ACLs) are true? (Choose two.)
- A. Network ACLs support allow rules and deny rules.
- B. Network ACLs must be manually applied to virtual network interfaces.
- C. Network ACLs are stateless, and inbound and outbound rules are used for traffic filtering.
- D. Network ACLs are stateful, and inbound and outbound rules are used for traffic filtering.
Answer: A,C
NEW QUESTION 26
A company deployed a FortiGate-VM with an on-demand license using Amazon Web Services (AWS) Market Place Cloud Formation template. After deployment, the administrator cannot remember the default admin password.
What is the default admin password for the FortiGate-VM instance?
- A. admin
- B. <blank>
- C. The admin password cannot be recovered and the customer needs to deploy the FortiGate-VM again.
- D. The instance-ID value
Answer: D
NEW QUESTION 27
What is the bandwidth limitation of an Amazon Web Services (AWS) transit gateway VPC attachment?
- A. Up to 50 Gbps per attachment
- B. Up to 1.25 Gbps per attachment
- C. Up to 1 Gbps per attachment
- D. Up to 10 Gbps per attachment
Answer: B
NEW QUESTION 28 
Refer to the exhibit. The exhibit shows a topology where multiple connections from clients to the same FortiGate-VM instance, regardless of the protocol being used, are required.
Which two statements are correct? (Choose two.)
- A. The design shows an active-passive FortiGate-VM architecture.
- B. The design shows an active-active FortiGate-VM architecture.
- C. The Cloud Load Balancer Session Affinity setting should be changed to CLIENT_IP.
- D. The Cloud Load Balancer Session Affinity setting should use the default value.
Answer: B,C
NEW QUESTION 29
You have previously deployed an Amazon Web Services (AWS) transit virtual private cloud (VPC) with a pair of FortiGate firewalls (VM04 / c4.xlarge) as your security perimeter. You are beginning to see high CPU usage on the FortiGate instances.
Which action will fix this issue?
- A. Migrate the transit VPNs to new and larger instances (VM08 / c4.2xlarge).
- B. Convert the c4.xlarge instances to m4.xlarge instances.
- C. Convert the transit VPC firewalls into an auto-scaling group and launch additional EC2 instances in that group.
- D. Convert from IPsec tunnels to generic routing encapsulation (GRE) tunnels, for the VPC peering connections.
Answer: C
Explanation:
Explanation
Multiple FortiGate-VM instances form an Auto Scaling group to provide highly efficient clustering at times of high workloads. FortiGate-VM instances can be scaled out automatically according to predefined workload levels.
https://docs.fortinet.com/document/fortigate-public-cloud/6.2.0/aws-administration-guide/397979/deploying-auto
NEW QUESTION 30
An organization deployed a FortiGate-VM in the Google Cloud Platform and initially configured it with two vNICs. Now, the same organization wants to add additional vNICs to this existing FortiGate-VM to support different workloads in their environment.
How can they do this?
- A. They can use the Compute Engine API Explorer.
- B. They can create additional vNICs using the Cloud Shell.
- C. They can create additional vNICs in the UI console.
- D. They cannot create and add additional vNICs to an existing FortiGate-VM.
Answer: A
Explanation:
Explanation/Reference: https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/62d32ecf-687f-11ea-
9384-00505692583a/FortiOS-6.4-GCP_Cookbook.pdf
NEW QUESTION 31
Which two statements about the Amazon Cloud Services (AWS) network access control lists (ACLs) are true?
(Choose two.)
- A. Network ACLs support allow rules and deny rules.
- B. Network ACLs must be manually applied to virtual network interfaces.
- C. Network ACLs are stateless, and inbound and outbound rules are used for traffic filtering.
- D. Network ACLs are stateful, and inbound and outbound rules are used for traffic filtering.
Answer: A,C
Explanation:
Explanation/Reference: https://docs.aws.amazon.com/vpc/latest/userguide/vpc-network-acls.html
NEW QUESTION 32 
Refer to the exhibit. Your senior administrator successfully configured a FortiGate fabric connector with the Azure resource manager, and created a dynamic address object on the FortiGate VM to connect with a windows server in Microsoft Azure. However, there is now an error on the dynamic address object, and you must resolve the issue.
How do you resolve this issue?
- A. Run diagnose debug application azd -lon FortiGate.
- B. Delete the address object and recreate a new address object with the type set to FQDN.
- C. In the Microsoft Azure portal, access the windows server, obtain the private IP address, and assign the IP address under the FortiGate-VM AzureLab address object.
- D. In the Microsoft Azure portal, set the correct tag values for the windows server.
Answer: C
Explanation:
Explanation
NEW QUESTION 33
......
Features of Fortinet NSE7_PBC-6.4 Certification
The Fortinet NSE7_PBC-6.4 certification exam is designed for IT professionals who want to validate their skills in network security infrastructure. It tests your knowledge in the latest technologies and tools used in network and security operations. The Fortinet NSE7_PBC-6.4 certification enables you to obtain highly paid job opportunities and takes your career to new heights. It is very easy to prepare for Fortinet NSE7_PBC-6.4 certification exam in a short period of time. You can easily prepare for this exam with the help of this article. It contains many useful features and information for helping you to pass the NSE7_PBC-6.4 certification exam.
NSE7_PBC-6.4 Dumps With 100% Verified Q&As - Pass Guarantee or Full Refund: https://examtorrent.actual4test.com/NSE7_PBC-6.4_examcollection.html