[Jun-2026] HP HPE0-S59 Official Cert Guide PDF
Exam HPE0-S59: HPE Compute Solutions - Actual4test
Briefly explain the Objective of the HP HPE0-S59 Exam
The HPE0-S59 exam is an entry level exam and the objective of the exam is to test your ability to successfully install, deploy, and administer HPE products. The HPE0-S59 exam covers basic skills including managing a single server configuration, installing software updates, configuring hardware options and troubleshooting hardware issues. This exam also covers creating virtual machines and migrating them between hosts. HP HPE0-S59 exam dumps will upgrade your prep.
You will receive real simulator with highly ensure rate and finding verified answer strengthen assess for the busy update that responses objectives technical correct and incorrect engine testing times support and free PDF files.
NEW QUESTION # 22
Match HPE Superdome Flex system with its specific feature.
Answer:
Explanation:
Explanation:
Here are the correct matches for each HPE Superdome Flex system with its respective feature:
* HPE Superdome Flex
* Support for 32 sockets and 48TB of memory
* Support for nPar with 16 sockets
* HPE Superdome Flex 280
* Maximum of 24TB memory
* Minimum of 768 GB of memory
* HPE Superdome Flex:
* Support for 32 sockets and 48TB of memory: The HPE Superdome Flex system is designed for extremely large-scale workloads and can support configurations with up to 32 CPU sockets and
48TB of memory.
* Support for nPar with 16 sockets: This system supports nPartitions (nPars) with configurations that can include up to 16 CPU sockets, providing flexible partitioning and resource allocation.
* HPE Superdome Flex 280:
* Maximum of 24TB memory: The HPE Superdome Flex 280 supports a maximum memory capacity of 24TB, suitable for large but not as massive workloads compared to the full Superdome Flex.
* Minimum of 768 GB of memory: The minimum memory configuration for the HPE Superdome Flex 280 is 768 GB, ensuring a base level of performance and capacity for smaller deployments.
NEW QUESTION # 23
Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has the appropriate storage controller installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that the compute nodes cannot access the storage module.
What will you verify first when troubleshooting this problem?
- A. If there is at least one iSCSI network configured that will provide access to the module.
- B. If the D3940 storage module is properly licensed through the HPE OneView interface.
- C. If the D3940 module is imported in a managed state that allows volume provisioning.
- D. If the SAS logical interconnect is a part of the logical enclosure and has a healthy state.
Answer: D
NEW QUESTION # 24
In the past a customer experienced a networking issue where network ports went down and came back up in quick succession.
Which HPE Virtual Connect SE 100 GD F32 Module for HPE Synergy feature can be configured to disable such ports?
- A. sFlow
- B. Port flap protection
- C. Pause flood protection
- D. Storm control
Answer: B
Explanation:
Port flap protection is a feature of the HPE Virtual Connect SE 100Gb F32 Module for HPE Synergy that can be configured to disable ports experiencing frequent up and down transitions.
This feature helps to stabilize the network by preventing the disruptive effects of port flapping.
NEW QUESTION # 25
Drag and Drop Question
Match HPE Superdome Flex system with its specific feature.
Answer:
Explanation:
NEW QUESTION # 26
Your customer reports that they cannot deploy HPE Synergy compute nodes using HPE OneView for VMware vCenter Server (HPE OV4VC).
What should you check during troubleshooting process?
- A. If the HPE Oneview instance Is integrated with HPE OV4VC.
- B. If HPE OneView credentials are added in vCenter Server
- C. If vCenter Server is licensed in the HPE Oneview interface
- D. If an compute nodes are added to the vCenter Server
Answer: D
NEW QUESTION # 27
Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They plan to use Distributed Switches and DRS cluster You are preparing a proposal with the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- an appropriate number of the vSphere Standard licenses for each compute node
- one HPE D3940 Storage Modules with 40 SSDs - all required cables and options Which statement about this proposal is true?
- A. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM
- B. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drive.
- C. 2 additional HPE Synergy 480 Gen10 Plus compute modules can be added to this setup
- D. vSphere Standard licenses should be replaced with Enterprise Pius licenses to enable requested features
Answer: D
Explanation:
The VMware vSphere Standard license does not include support for advanced features like Distributed Resource Scheduler (DRS) and Distributed Switches. These features are available onlywith the vSphere Enterprise Plus license. Therefore, to meet the customer's requirement of using Distributed Switches and a DRS cluster, the proposal should include vSphere Enterprise Plus licenses instead of Standard licenses.
NEW QUESTION # 28
Your customer plans to add four HPE Synergy frames to an existing management ring Ail installed frames are equipped with two 2-port FLM modules, while new frames will be equipped with 4-port FLM modules.
Which statement about mixing different FLM modules is true?
- A. A management ring with mixed FLM modules cannot have more than 12 frames
- B. Existing 2-port FLM modules must be replaced with 4-port FLM modules
- C. Mixing different FLM modules is allowed if all of them have the same firmware version
- D. A management ring can contain mixed frame link module configurations
Answer: A
NEW QUESTION # 29
Your customer plans to expand an existing nPar based on a single HPE Superdome Flex chassis. Which statement about workload availability during expansion is true?
- A. Powered nPar can be expanded only if HPE Superdome Flex 280 is used
- B. HPE Superdome Flex does not support expansion of powered on nPars
- C. Online expansion is available only if RMC is used for management.
- D. Powered nPar can be expanded if it does not use HPE Persistent Memory
Answer: D
Explanation:
HPE Superdome Flex allows for the expansion of powered-on nPars (nPartitions), but this capability is subject to certain conditions. One of these conditions is that the nPar does not use HPE Persistent Memory.
Expanding an nPar with Persistent Memory typically requires a shutdown to reconfigure the memory settings safely.
NEW QUESTION # 30
Your customer plans to deploy ESXi systems to HPE Synergy and HPE ProLiant servers using HPE OneView for VMware vCenter Server.
Which statement about HPE OneView for VMware vCenter Server functionality is true for this environment?
- A. Individual systems can be added to HPE OneView for VMware vCenter Server through an ILO management processor
- B. HPE Synergy requires HPE Composer 2 for full functionality of HPE OneView for VMware vCenter Server
- C. HPE ProLiant servers need an HPE OneView for VMware vCenter Server license for full functionality
- D. Only systems managed using HPE Oneview can use HPE Oneview for VMware vCenter Server functionalities
Answer: D
Explanation:
HPE OneView for VMware vCenter Server provides integrated management and monitoring capabilities for systems managed by HPE OneView. This means that to leverage the full functionality of HPE OneView for VMware vCenter Server, the systems (both HPE Synergy and HPE ProLiant servers) must be managed through HPE OneView. This integration allows for comprehensive infrastructure management directly from the VMware vCenter interface.
NEW QUESTION # 31
An HPE Synergy customer needs to prevent a timeout and loss of communication during an external switch firmware upgrade.
Click the parameter that the customer should configure within an uplink set to meet this requirement
Answer:
Explanation:
Explanation:
To prevent a timeout and loss of communication during an external switch firmware upgrade, the customer should configure the LACP failover trigger within the uplink set. By setting the LACP failover trigger to "All active uplinks transition to offline," the configuration ensures that the traffic will be redirected to available uplinks in the event of an uplink failure or during the upgrade process, maintaining communication and preventing timeouts.
NEW QUESTION # 32
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. The master modules are located in the interconnect bays 2 and 5
- B. For the given downlink speed, the maximum number of frames is reached
- C. Both master modules are located in the same HPE Synergy frame
- D. To use interconnect bay set 3, all compute nodes must be half-height
Answer: D
Explanation:
In HPE Synergy configurations, when using interconnect bay set 3, it implies that the compute nodes should be half-height. This is because bay set 3 is typically utilized in configurationswhere half-height compute nodes are used to ensure proper alignment and connectivity within the Synergy frame.
NEW QUESTION # 33
Your customer plans to expand an existing nPar based on a single HPE Superdome Flex chassis.
Which statement about workload availability during expansion is true?
- A. Powered nPar can be expanded only if HPE Superdome Flex 280 is used
- B. Online expansion is available only if RMC is used for management.
- C. HPE Superdome Flex does not support expansion of powered on nPars
- D. Powered nPar can be expanded if it does not use HPE Persistent Memory
Answer: C
Explanation:
In the HPE Superdome Flex system, an nPar (partition) cannot be expanded while it is powered on. The system typically requires a downtime for expansion operations, which involves removing or adding hardware components such as processors, memory, or I/O resources to the chassis.
NEW QUESTION # 34
Which statement about a new HPE SimpliVity deployment is true?
- A. New HPE SimpliVity deployments give customer flexible choice of hypervisor
- B. All new HPE SimpliVity models support deduplication and compression
- C. All new HPE SimpliVity models are based on AMD CPUs
- D. New HPE SimpliVity deployments are licensed per node not per physical socket
Answer: B
NEW QUESTION # 35
Your customer is trying to grow a VMware cluster using HPE OneView for VMware vCenter Server. They get an error and cannot proceed.
Which tool should you use to troubleshoot the problem?
- A. vCenter Server to use the HPE OneView for VMware vCenter plugin to import the cluster for HPE OneView management.
- B. HPE OneView for VMware vCenter Server to verify if the server profile template is properly imported and registered.
- C. iLO interface of a given HPE Synergy compute node to verify whether this node is registered within HPE OneView.
- D. HPE OneView interface to import an existing cluster using the hypervisor cluster profile functionality.
Answer: B
NEW QUESTION # 36
As a result of the troubleshooting process, you recommend replacing, HPE Synergy Composer modules which HPE Synergy Composer 2 Why would you recommend this change?
- A. HPE Composer 1 cannot support remote frames, which doubles the configuration and management procedures effort
- B. HPE Composer 2 provides access to 105 interface that can be used for full management of HPE Composer 2 remotely
- C. HPE Composer 1 running HPE OneView 5 2 or later can support only 12 frames within a single management nog
- D. HPE Composer 2 can support more than the maximum 21 frames that are supported with HPE Composer 1 and HPE OneView.
Answer: D
Explanation:
HPE Composer 2 offers enhanced scalability compared to HPE Composer 1. While HPE Composer 1 and HPE OneView support up to 21 frames, HPE Composer 2 extends this limit, allowing for greater scalability and more efficient management of larger HPE Synergy environments. This makes HPE Composer 2 a suitable recommendation for customers needing to manage more than 21 frames.
NEW QUESTION # 37
The proposal consists of.
- 3 HPE Synergy 12000 frames
- 6 HPE Composer 2 modules
- 2 HPE Virtual Connect SE 100 GO F32 Module
- 4 HPE Synergy 50 GO interconnect Link Module
Which statements about this proposed design are true? (Select two.)
- A. FC upgrade licenses for HPE Virtual Connect SE 100 GbF32 Module must be added
- B. The current setup can support up to 18 HPE Synergy 480 Gen10 Plus compute modules
- C. HPE Synergy 50Gb ILMs must be replaced with HPE Virtual Connect SE 100 GO F32 modules
- D. Remove 4 HPE Composer 2 modules from the design, as they are not required
- E. The selected interconnect modules do not provide the requested WWN virtualization
Answer: A,D
Explanation:
* D. FC upgrade licenses for HPE Virtual Connect SE 100 GbF32 Module must be added:To enable Fibre Channel functionality on the HPE Virtual Connect SE 100Gb F32 Modules, it is necessary to add FC upgrade licenses. These licenses unlock the FC capabilities required for the proposed setup.
* E. Remove 4 HPE Composer 2 modules from the design, as they are not required:The proposed design includes 6 HPE Composer 2 modules, but typically, only a pair of HPE Composer 2 modules is required to manage up to 21 frames. Therefore, the remaining 4 Composer 2 modules are not necessary and can be removed from the design.
NEW QUESTION # 38
A logical interconnect group can span on multiple HPE Synergy frames for which interconnect type?
- A. Brocade 32GB Fibre Channel Switch Module for HPE Synergy
- B. HPE Synergy 12 Gb SAS Connection Module
- C. HPE virtual Connect SE 32 Gb FC Module for Synergy
- D. HPE Virtual Connect SE 100 Gb F32 Module tor Synergy
Answer: D
Explanation:
A logical interconnect group in HPE Synergy is used to define a consistent network configuration across multiple frames. The HPE Virtual Connect SE 100 Gb F32 Module for Synergy allows for logical interconnect groups to span across multiple frames. This is because the 100 Gb module supports high-speed connectivity and the necessary infrastructure to maintain consistent network configurations over multiple frames, which is essential for scalable and flexible Synergy environments.
NEW QUESTION # 39
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.
Answer:
Explanation:
Explanation:
To configure HPE OneView for VMware vCenter Server to deploy ESXi systems, follow these steps in the correct order:
* Add HPE OneView credentials to the vCenter Server and create OS Deployment Plan.
* Add vCenter Server to HPE OneView for VMware vCenter Server.
* Upload HPE-friendly ESXi image.
* Deploy new ESXi systems using vCenter Server interface.
* Add HPE OneView credentials to the vCenter Server and create OS Deployment Plan:Integrate HPE OneView with vCenter Server by adding the necessary credentials and setting up the OS Deployment Plan.
* Add vCenter Server to HPE OneView for VMware vCenter Server:Ensure that vCenter Server is added to HPE OneView for VMware vCenter Server to enable communication and management.
* Upload HPE-friendly ESXi image:Upload an ESXi image that is optimized for HPE hardware to the vCenter Server for use in the deployment process.
* Deploy new ESXi systems using vCenter Server interface:Use the vCenter Server interface to deploy new ESXi systems based on the created server profile template and the uploaded ESXi image.
These steps ensure a seamless deployment and management of ESXi systems using HPE OneView integrated with VMware vCenter Server.
NEW QUESTION # 40
Your customer wants to add dedicated Fibre Channel connectivity to the HPE Synergy frame running HPE Synergy 480 Gen10 compute modules, each with one CPU socket populated Currently they use two 12 Gb SAS switches and two HPE Virtual Connect SE 100Gb F32 Modules for HPE Synergy installed in third fabric.
What must be done to enable dedicated FC connectivity for this HPE Synergy frame?
- A. A second CPU must be installed for all HPE Synergy 480 Gen10 compute nodes.
- B. SAS switches must be moved to second fabric and FC modules Installed in the first one.
- C. For Brocade switches, a logical interconnect group must be created in HPE OneView.
- D. For VC-FC modules, all of server facing ports must be property licensed.
Answer: C
Explanation:
To enable dedicated Fibre Channel (FC) connectivity in an HPE Synergy frame, if using Brocade switches, it is necessary to create a logical interconnect group in HPE OneView. This group defines the configuration and management of FC connectivity for the compute modules. Properly configuring and managing this logical interconnect group ensures that the compute modules can establish dedicated FC connections.
NEW QUESTION # 41
Your customer plans to add four HPE Synergy frames to an existing management ring.
All installed frames are equipped with two 2-port FLM modules, while new frames will be equipped with 4-port FLM modules.
Which statement about mixing different FLM modules is true?
- A. A management ring with mixed FLM modules cannot have more than 12 frames
- B. A management ring can contain mixed frame link module configurations
- C. Existing 2-port FLM modules must be replaced with 4-port FLM modules
- D. Mixing different FLM modules is allowed if all of them have the same firmware version
Answer: B
Explanation:
In HPE Synergy, a management ring can indeed contain mixed frame link module (FLM) configurations. This means you can have a mix of 2-port and 4-port FLM modules within the same management ring without needing to replace the existing 2-port modules. This flexibility allows for gradual upgrades and scalability within the management ring.
NEW QUESTION # 42
Hotspot Question
Click the area within the iLO management interface that will allow you to access workload Advisor.
Answer:
Explanation:
NEW QUESTION # 43
When presented with a server issue, how should an action plan for resolution be formulated?
- A. By randomly replacing server components
- B. Based on the most recent server trends
- C. Solely based on the aesthetics of the solution
- D. According to the severity and impact of the issue
Answer: D
NEW QUESTION # 44
What is a restriction of using a RoCE network?
- A. It does not support smart link and private network features.
- B. It does not support Private VLAN and Multicast VLAN.
- C. it is not supported with HPE Virtual Connect SE 40 GD F8 Module for HPE Synergy.
- D. It is by default configured as an untagged network and cannot be a part of a network set.
Answer: D
NEW QUESTION # 45
Your customer plans to setup an HPE Synergy solution based on SY480 Gen10 compute nodes with the following connectivity options - SAS connectivity installed in the first fabric - FC connectivity Installed In the second fabric - Ethernet connectivity installed in the third fabric.
Which statement regarding this setup is true?
- A. Interconnect modules that provide SAS connectivity should be moved to the third fabric
- B. Compute nodes must have a second CPU installed to access the second fabric.
- C. Each compute node must have at least 768GB of memory installed
- D. Each interconnect module in each fabric must be properly licensed in HPE OneView
Answer: C
NEW QUESTION # 46
......
Free HPE0-S59 Exam Dumps to Improve Exam Score: https://examtorrent.actual4test.com/HPE0-S59_examcollection.html